Greenwatts

Solar Tracker Mounting Holes

This step you will add reinforced mounting holes to the gear box on the end opposite of the worm gear assembly. Follow the pictures below and cut out small rectangles to make reinforced bolt hole mounts. You have to make sure there will be enough clearance to insert a mounting bolt. For each side first cut a top and bottom piece cement then add a vertical piece let the cement dry a little then add a inside vertical piece and a outside vertical piece. Let the cement dry and then drill holes making sure you drill is as square as possible to the gear housing. If you are off and can't insert a mounting bolt just enlarge one of the holes slightly for more clearance.